ZF1 Liquid Protector (4oz) (118 ml)
ZF1 Liquido Protector (4oz) (118 ml)
ZF1 is a protective fluid very easy to apply for protection of electrical and electronic equipment against short circuits over water in all its forms.
• ZF1 is also a very high anticorrosive.
• ZF1 prevents the metal parts such as cables, connectors, switches, circuit boards, are in contact at the molecular level with water in all its forms.
• If there is no contact between water and metal there is no corrosion, if there is no contact between water and electricity there is no short circuit, simple, that is ZF1.
ZF1 IS A REVOLUTIONARY NANOTECHNOLOGY THAT IS THE MOST EFFECTIVE LIQUID PROTECTOR OF ELECTRICAL AND ELECTRONIC EQUIPMENTS, DEVICES AND ISTALLATIONS.
|Shake before using
ZF1 must be applied at all connections, cables, metal parts, circuits and connections, without exception.
ZF1 is easy to use: simply spray directly to the area to protect against water, humidity, moisture and other fluids. Contacts, printed circuit boards, cables, connections, switches and metal parts of electrical and electronic equipment once applied with ZF1 must wait 5-10 minutes for it to take effect. In many cases these components must be opened in order to access the electrical equipment. It is recommended in these cases that this be done by a professional. In other cases it is not necessary and anyone can spray the surfaces to be protected directly.
In the application against corrosion, rust and lubrication, apply directly to the surface oxidized or corroded to lubricate easily.
When the metal, electrical or electronic equipment is wet, dry before applying the ZF1, so it can penetrate and properly perform its function.
Caution: You must disconnect all electrical & electronic devices prior to application. Serious injury may occur if you touch any area that has been applied.
Remember you must not touch the applied device even after reconnection as ZF1 is a protector but also a conductor.
After the surface has been sprayed micron thick, tightly adhesive, water-repellent protective nano film immediately forms.
Owing to its outstanding flow properties, the substance permanently fills even the most minute cavities, electrical windings and coils. Consistent with laboratory testing, the product exhibits a water displacement coefficient of 100 % within ten seconds. This is a value unmatched by any other product in the world.
Even after long-term contact, the combination of substances and water do not mix.
Another important reason for ZF1’s effectiveness is that the substance itself is water insoluble. The protective shield against moisture is so strong that it even allows for electrical conductivity under water. This means that electrical devices and installations still continue to work even when they are already wet or in extreme cases, when they are completely submerged in flood situations.
Inhalation: Vapor concentrations above recommended exposure levels are irritating to the eyes and the respiratory tract and may cause headaches and dizziness. They are anesthetic and may have other central nervous systems effects.
On the Skin: Low odor of toxicity. Frequent or prolonged contact may dry the skin, leading to discomfort and dermatitis.
On the Eyes: Irritating, but does not injure eye tissue.
Ingestion: Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause bronchopneumonia or pulmonary edema.
First aid measure:
After inhalation: Supply fresh air, consult doctor in case of symptoms.
After skin contact: Wash intensively with water and soap. Use protective skin ointment. If skin irritation continues, consult a doctor.
After eye contact: Rinse opened eye for several minutes under running water. Then consult doctor.
After swallowing: Instantly call for doctor.