Cutting of motors by signal pwm

2scmd engine cut system by pwm signal

This system is a simple and effective solution that allows a cut of the drone motors maintaining the general power of both the equipment and the controller therefore allows us to activate any recovery system, such as a parachute if we have it installed.

We can stop up to 8 drives and we can increase this possibility on request.

Certain regulations, such as the French, require the installation of this system to be able to fly in city. The 2SCMD principle: in normal flight configuration, the 2SCMD board picks up the signal from the output of any flight controller and transmits it to the drives, so we can consider the 2SCMD as a servo extension. In the case of use of the 2SCMD board, when we activate this system. We cut this link, so there is no signal to the drives, and immediately, the engines stop. immediately, a signal is sent to activate the parachute system. and at the same time, a giant Buzzer, warns of the emergency situation with a very large range due to the sound emitted.

weight: 136 gr.

Dimensions: 17/48/65 mm.

Composition: Industrial ABS plastic.

Buzzer of 110 dB at 1 meter

868 MHz encrypted key, 2km range

Comes with batteries