Multilink for Inspire 2
Multilink creates a network of remote controls, with one primary and up to three secondary, using Cendence and Inspire 2 remotes. The various secondary remotes form a star network with the primary remote control. The secondary remotes can control the aircraft through the primary remote control and receive image signal directly from the aircraft.
Compatible with the remote control of the Inspire 2 and with Cendence remote contoles.
Create a network of remote controls with a primary and up to three secondary so that recording and photography is more efficient.
The primary and secondary remotes can remain communicated even more than 150 m away.
Multilink is compatible only with the Inspire 2 if it is used with the Cendence remote control.
Operating frequency: 2400 - 2483.5 MHz, 5725 - 5850 MHz
PIRE: 2.4 GHz: FCC <25 dBm, CE <20 dBm, SRRC <20 dBm; 5.8 GHz: FCC <29 dBm, CE <14 dBm, SRRC <19 dBm
Scope of communication: 150 m (2.4 GHz), 100 m (5.8 GHz)
Input: 4.2 - 5.5 V, 1 A Max
Maximum delay (From the primary remote to the three secondary): 7.5 ms (5.8 GHz) / 11.1 ms (2.4 GHz)
Minimum delay (From primary to secondary remote control): 2.5 ms (5.8 GHz) / 3.7 ms (2.4 GHz)
Operating temperature: -20 to 40ºC (-4 to 104ºF)
Compatible with DJI devices with a CAN port: DJI Focus, GPS module for remote control of the Inspire 2, auxiliary antenna.
Inspire 2 Remote Control
Cendence remote control
You might also like