Phantom 4 RTK + D-RTK 2 Mobile Station Combo
Positioning with centimetre-level accuracy
The Phantom 4 RTK includes a fully integrated RTK module that provides real-time centimetre-level position information for absolute accuracy in image metadata. Right next to the RTK receiver is a redundant GNSS module that makes it possible to maintain flight stability in places with poor signal reception, such as densely populated cities. The combination of these two modules allows the Phantom 4 RTK to optimise flight safety while ensuring that the most accurate information possible is obtained for complex survey, mapping and inspection tasks.
The Phantom 4 RTK fits into any workflow. You can connect your positioning system to the D-RTK 2 mobile station, to NTRIP (Network Transport of RTCM via Internet Protocol) via a 4G accessory or a local Wi-Fi network, or store satellite information for use in PPK (Kinematic Post Processing).
Get accurate data thanks to TimeSync
The new TimeSync system is designed to continuously synchronise the flight controller, camera and RTK module to take full advantage of the Phantom 4 RTK's positioning modules. In addition, TimeSync ensures that all photos will use the most accurate meta-information and fixes the positioning data to the centre of the CMOS - optimising the results of photogrammetric methods and allowing the image to achieve centimetre-level accuracy.
Accurate imaging system
Capture the best image with a 1-inch, 20 megapixel CMOS sensor. Thanks to its mechanical shutter, the Phantom 4 RTK can move and capture images without shutter distortion, so both mapping missions and routine data capture can be performed smoothly. With its high resolution, the Phantom 4 RTK can achieve a ground pixel size (GSD) of 2.74 cm at 100 m altitude. In order for the Phantom 4 RTK to deliver unparalleled accuracy, all targets undergo a rigorous calibration process in which radial and tangential distortions of the target are measured. These measurements are stored in the metadata of each image so that post-processing software can make customised adjustments for each user.
Dedicated flight planning application
A new GS RTK application gives users more ways to control their Phantom 4 RTK, with two planning modes (photogrammetric and trajectory) joining the traditional flight mode. The planning modes allow the pilot to set the drone's flight path and set parameters such as overlap ratio, altitude, speed, camera settings and more. This allows mapping or inspection workflows to be automated.
The GS RTK application has been created with its users in mind, and has numerous functions designed for specific mapping or inspection workflows. The application allows direct upload of KML area files for flight planning in the office, has a shutter priority mode that keeps exposure constant on all photos, and a high wind alarm warns pilots of adverse weather conditions.
Mobile SDK Compatible
The Phantom 4 RTK is compatible with DJI's Mobile SDK, so functions can be automated and customised via the mobile device.
OcuSync Streaming System
Enjoy stable and reliable HD image transmission with a range of 7km, ideal for mapping large areas.
*Unobstructed, interference-free, FCC compliant. Transmission range depends on radio signal strength and resilience. Always fly your drone within line of sight unless otherwise authorised.
Uncomplicated compatibility with the D-RTK 2 Mobile Station
Complement your Phantom 4 RTK missions with the D-RTK 2 mobile station and get real-time relative drone position data to form an accurate survey solution. The mobile station's robust design and OcuSync 2.0 transmission system ensure centimetre-accurate data collection with your Phantom 4 RTK in all situations.
Start mapping now
With an integrated flight planning application (GS RTK) and an easy way to collect RTK data (RTK Network or D-RTK 2 Mobile Station), pilots have a complete solution for surveying, mapping or inspection at their disposal.
*** Translated with www.DeepL.com/Translator (free version) ***