Parachute kit DJI Matrice M200 / M210 - S3 + Opale Control
Parachute kit - DJI Matrice M200 / M210 - S3 + Opale Controller
This dual parachute backup device will allow you to secure your DJI M200 or M210 Matrice in all circumstances.
This guarantees an impact of less than 69J for the SAC scenario of DGAC.
Parachute kit for DJI Matrice M200 / M210
Ultra fast deployment: 0.3 to 0.8s
Low fall rate: 3 - 4m.
Easy to install
Powered by a simple PPM / PWM signal
Refurbished parachutes in less than 60 years.
Tube made of carbon
Blocked for transport
Pioneer in the production of emergency parachute for drones, Opale Parachutes presents its new range of Safetech® products.
A simple and innovative technology.
This new emergency parachute device will allow you to secure your drone in all circumstances.
Thanks to its new extraction technology, the parachute is ejected and deployed in less than 0.8 s, with a height of between 3 and 8 meters.
Unlike competitive systems, Safetech® does not put the parachute under constant pressure, which guarantees safe extraction and rapid deployment, as well as long-term storage of the parachute, without having to repackage it every week.
Resistance to any event
The reserve parachute strap is made of aramid / Kevlar, which guarantees a breaking strength of 300 kg. There are no knots in the lines such as the belt, which allows to obtain 100% mechanical resistance and an irreproachable finish, for an optimal useful life.
The parachute is made with the same industrial quality standards as an emergency parachute for ULM. The fabric has a silicone coating, with a particularly low mass (only 32gr / m2), to satisfy the need for lightness.
Low energy in the impact.
A new parachute geometry has been specially developed to meet the needs of lightness, small size, stability in flight, efficiency during opening. So you can benefit from a very low drop rate, a maximum impact energy of 55.2J for a mass of 7 kg, for only a mass of the system of 650 gr.
This low power will allow you to easily approve your machine with the DGAC for scenario S3.
Guarantee of reliability, serenity and safety.
A market inventory allows you to quickly understand the benefits of Safetech ® technology:
No pyrotechnic device: easy and safe air transport, without risk of uncontrolled explosion or during handling or maintenance.
Without permanent parachute pressurization: longer conditioning time, the opening is ultra fast and efficient.
Melting device without fuse for Lipo battery short circuit: there is no extra mass with lipo battery, shorter and optimized firing time, without risk of inflating your Lipo battery, without risk of fire.
As you have understood, Safetech® technology will offer you the best safety and reliability standard to secure your unmanned aircraft in all situations, at a very attractive price.
Dimensions of the tube: 120x80mm
Operating mass: 650gr.
Servo connector: UNI
Signal: PPM / PWM compatible with dedicated radio remote control or stand-alone module
Voltage: 4.8 to 7.2v
Flat surface of the parachute: 3m2.
Hangers: Dynema / Aramid Kevlar spliced (no knots)
Fabric: 32gr / m2 of silicone.
Aramid 300daN union strap (300kg)
Indicative drop rates according to the flight load for a 2.5m2 parachute:
Mass of the multi-rotor [kg]: 4 4.5 5 5.5 6 6.5 7
Falling speed [m / s]: 3 3.2 3.4 3.5 3.7 3.8 4
Energy impact [J]: 18 22.8 28.2 34.1 40.6 47.6 55.2
Included in this kit:
2 Safetech ST80 ejection tubes
2 parachutes of 3m2
2 mounting kits
1 set of screws
Items required and not included in this kit:
Radio control or autonomous module.
Battery 4.8 to 7.2v