Dronetag BS Combo
Dronetag BS Combo
Dronetag BS Combo
Dronetag BS Combo
Dronetag BS Combo
Dronetag BS Combo

Dronetag BS Combo

Dronetag BS Combo
DELIVERY IN 1 DAY
€99.09
Free for 9910 points Free for 9910 points
* 1 Days - 19 H Spain.. Other country Ask Sales Dep.

Dronetag BS Combo

 

Dronetag BS Combo

The Dronetag BS Combo is a package with enclosure, battery, charger and antennas turning BS into a completely standalone battery-powered module.

Package contains:

  • 1× Dronetag BS
  • 1x 3D printed Enclosure with battery slot
  • 1x Li-Po battery
  • 1x USB-C battery charger
  • 1x External GNSS Wire Antenna (U.FL)
  • 1x External Bluetooth Wire Antenna (U.FL)
  • 1x Shrink Tube
  • 1x JST SH 3-pin to Open Wire Cable
  • 1x JST SH 4-pin to Open Wire Cable

  • Easy installation and compatibility with various aircraft hardware setups
  • Real-time tracking and Remote ID compliant with the FAA and EASA rule
  • Powered from the existing aircraft or a small LiPo battery (up to 17V input)
  • Configuration and firmware updates via Dronetag App
  • Can be used as GNSS input to Betaflight controller*
  • Support for both Spektrum XBUS and SRXL2.
  • Can be used as a telemetry module for popular RC radios*
  • Flight information logging to flash memory for easy visualization in Dronetag App, Google Earth, or similar*
  • Additional SAW filters enhance product immunity to radio interference, significantly improving GNSS performance
  • LED placement atop the PCB enhances device visibility, indicating readiness more effectively
  • Threaded columns on the PCB facilitate easier mounting to plastic enclosures and DIY mounts
  • Solder pads on the PCB underside cater to users preferring customized cable soldering over JST connectors

Data sheet

Remote ID types
Direct (EU) / Broadcast (US)
Short-range radio
Bluetooth 2.4GHz
Average current consumption
15 mA
Maximum current consumption
50 mA
Mounting
Adhesive or velcro
Operating temperature
-40°C to +85°C (-40°F to 185°F)
Dimensions
23 x 16 x 12 mm (0.90 x 0.62 x 0.47 in)
Weight
5 grams (0.176 oz) with antennas, enclosure & battery
Supported baud rates
Standard ones - configurable in Dronetag app
Input voltage
3.3 – 17V
Input voltage regulator
Low-noise buck converter
Remote ID Standards
ASD-STAN EN 4709-002 & ASTM F3411-22
Certifications
Uses FCC/CE approved radio module
Remote ID technology
Bluetooth 4.0 Legacy + 5.0 Long Range

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.