Safetech ST100 parachute kit with 6 m2 parachute (mass ≤ 9 kg)

Parachute kit for Safetech ST100 drone with 6 m2 parachute (mass ≤ 9 kg)

This new emergency parachute device will allow you to secure an unmanned aircraft that weighs up to 9 kg in all circumstances.
It will guarantee an impact of less than 69J for the S3 DGAC scenario (within the limit of 8 kg imposed by the DGAC).

The ST100 is compatible with DJI S800 and S900 drones.

    Ultra fast deployment: 0.3 to 0.8s
    Low sink rate: 2.6 - 3.9 m s
    Only 700gr
    Easy to install
    Powered by a simple PPM / PWM signal
    Refurbished parachutes in less than 60 years.
    Tube made of carbon
    Kevlar binding
    Universal mounting
    Blocked for transport

Pioneer in the production of emergency parachute for drones, Opale Parachutes presents its new range of Safetech® products.
A simple and innovative technology.

This new emergency parachute device will allow you to secure your drone in all circumstances.

Thanks to its new extraction technology, the parachute is ejected and deployed in less than 0.8 s, with a height of between 4 and 10 meters.
Unlike competitive systems, Safetech® does not put the parachute under constant pressure, which guarantees safe extraction and rapid deployment, as well as long-term storage of the parachute, without having to repackage it every week.
Resistance to any event

The reserve parachute strap is made of aramid / Kevlar, which guarantees a breaking strength of 300 kg. There are no knots in the lines such as the belt, which allows to obtain 100% mechanical resistance and an irreproachable finish, for an optimal useful life.

The parachute is made with the same industrial quality standards as an emergency parachute for ULM. The fabric has a silicone coating, with a particularly low mass (only 32gr / m2), to satisfy the need for lightness.
Low energy in the impact.

A new parachute geometry has been specially developed to meet the needs of lightness, small size, stability in flight, efficiency during opening. Thus you can benefit from a very low fall rate, maximum energy at impact of 68J for a mass of 9 kg, only for a mass of the system of 700 gr.
This low energy will allow you to easily homologate your machine with the DGAC for scenario S3 (within the limit of 8 kg imposed by the DGAC).
Guarantee of reliability, serenity and safety.

A market inventory allows you to quickly understand the benefits of Safetech ® technology:

    No pyrotechnic device: easy and safe air transport, without risk of uncontrolled explosion or during handling or maintenance.
    Without permanent parachute pressurization: longer conditioning time, the opening is ultra fast and efficient.
    Melting device without fuse for Lipo battery short circuit: no additional mass with lipo battery, shorter and optimized firing time, without the risk of inflating your Lipo battery, without risk of fire.

As you have understood, Safetech® technology will offer you the best safety and reliability standard to secure your unmanned aircraft in all situations, at a very attractive price.
characteristics:

    Dimensions of the tube: 160x100mm
    Material: Carbon
    Operating mass: 700gr.
    Servo connector: UNI
    Signal: PPM / PWM compatible with dedicated radio remote control or stand-alone module
    Voltage: 4.8 to 7.2v
    Flat surface of the parachute: 6m2.
    Hangers: Dynema / Aramid Kevlar spliced ​​(no knots)
    Fabric: 32gr / m2 of silicone.
    Aramid 300daN union strap (300kg)

Indicative drop rates based on the flight load for a 6m2 parachute:
Mass of the multi-rotor [kg]: 4 5 6 7 8 8.5 9
Fall rate [m / s]: 2.6 2.9 3.2 3.4 3.7 3.8 3.9
Energy on impact [J]: 13 21 30 40 54 62 68
Included in this kit:

    1 Safetech ST100 ejection tube
    1 parachute of 6m2.
    1 fastening strap
    1 servomotor
    1 set of screws

Items required and not included in this kit:

    Radio control or autonomous module.
    Battery 4.8 to 7.2v