Parachute kit Safetech Inspire 1

Safetech parachute kit for DJI Inspire 1

This parachute rescue system will allow you to secure your DJI Inspire 1 up to 4.9 kg (10.8 lb) under any circumstance.

It will guarantee an impact energy lower than 69J, which will allow you to easily register your DJI Inspire 1 with respect to the regulations of your country for the airplane.
Safetech parachute kit for DJI Inspire 1 - Safetech ST60X with a DJI Inspire 1

    Super fast deployment: 0.3 to 0.8 s
    Low fall rate: 2.9 to 5.3m.s
    Only 220gr
    Easy to install
    Controlled with a simple PWM signal.
    Parachute ready to be reused in less than 60 years after deployment
    Carbon tube
    Fixation lines made of Kevlar.
    Universal mounting
    Blocked for transport

Pioneer in the development of unmanned aircraft rescue parachutes, Opal Parachutes presents its new Safetech® product range.

Safetech ST60X Safetech ST60X on your DJI Inspire 1.
A simple and innovative technology.

This new parachute rescue system will allow you to secure your drone in any circumstance.

Thanks to its new ejection technology, the parachute is better than 0.8 s, with a deployment height between 3 and 8 meters. Safetech® Unlike competitive systems, Safetech® does not apply to safe analysis, but does not require safe ejection.

A simple and quick fixation allows universal mounting on all machines available in the market.
Heavy duty resistance

The rescue parachute strap is made of aramid / Kevlar, which provides a breaking strength of 300 kg (661 lb). The lines and the belt are free, which allows to have a mechanical resistance of 100% and an exceptional finish, for an optimal useful life.

The parachute is made of the same quality standards as a ULA parachute rescue. The fabrics have a silicone coating with a very low mass (only 32 g / m2), which offers an extremely light system.
A low impact energy

A new parachute geometry was specially developed to offer the lightest, most compact rescue system, flight stability and opening efficiency. It will benefit from a low sink rate with a maximum impact energy of 66J for a 4.9kg (10.8 lb) drone weight, with a rescue parachute kit that only weighs 220g.

The result of this low impact energy will allow you to easily register your machine.
Commitment to safety, security and reliability.

A market analysis facilitates the understanding of the benefits of Safetech® technology:

    Free of pyrotechnic products: air transport and routine maintenance are easy and safe, Safetech® avoids the risk of explosion without control.
    The parachute is free of permanent pressure: increased life, super-fast and efficient deployment.
    Free fuse system: no useless battery weight, fast and optimized response time, no risk of Lipo battery inflation and no risk of fire.

To be understood, Safetech® technology will offer the best safety and reliability standards to protect your drone in any situation, at a very competitive price
Features:

    Tube dimensions: 150x60mm / 5.9x2.4in
    Material: Carbon
    Total weight: 220gr
    Servomotor connector: UNI
    Signal: PWM compatible with a transmitter or a stand-alone module
    Tension: 4.8 to 7.2v
    Flat area: 1.8m2 / 19.4ft2
    Lines: Dynema / Spliced ​​Aramid Kevlar (no knot)
    Fabrics: 32gr / m2 with silicon coating
    Fixation strap Aramid 300daN (300kg / 661.4lb)

Indicative falling speed according to the total flight mass for 1.8m2 (19.4ft2) parachute:
Total mass [kg]:
                         [lb]: 1.5
3.3 2
4.4 2.5
5.5 3
6.6 3.5
7.7 4
8.8 4.5
9.9 4.9
10.8
Falling speed [m.s]: 2.9 3.3 3.7 4.1 4.4 4.7 5 5.3
Impact energy [J]: 6 11 17 25 34 44 56 66
Included in this kit:

    1 x Safetech ST60X ejection tube
    1 x 1.8m2 parachute
    1 x fixation strap
    1 x servomotor
    1 x hardware and accessories kit
    1 x DJI Inspire 1 mounting kit

Required and not included:

    Transmitter or stand-alone module
    4.8 to 7.2V battery