DJI Inspire 2 parachute kit with...
DJI Inspire 2 parachute kit with...
DJI Inspire 2 parachute kit with...
DJI Inspire 2 parachute kit with...
DJI Inspire 2 parachute kit with...
DJI Inspire 2 parachute kit with...

DJI Inspire 2 parachute kit with 868MHz Radio and mounting kit

* 1 Days - 19 H Spain.. Other country Ask Sales Dep.
* 1 Days - 19 H Spain.. Other country Ask Sales Dep.

DJI Inspire 2 parachute kit with 868MHz Radio and mounting kit


Parachute kit for DJI Inspire 2 with 868MHz Radio and mounting kit

    Ultra fast deployment: 0.3 to 0.8s
    Low fall rate 2.9- 5.3m / s
    Only 250gr (with adapter)
    Easy to install
    Powered by a simple PPM / PWM signal
    Refurbished parachutes in less than 60 years.
    Tube made of carbon
    Kevlar binding
    Blocked for transport

Pioneer in the production of emergency parachute for drones, Opale Parachutes presents its new range of Safetech® products.

The mounting bracket included in this kit will allow you to install the Safetech ST60X rescue parachute system in minutes on your Inspire 2.

The radio control of 868MHz, when it will allow you to safely activate your parachute in a radius of 2.5 km.
A simple and innovative technology.

This new emergency parachute device will allow you to secure your drone in all circumstances.

Thanks to its new extraction technology, the parachute is ejected and deployed in less than 0.8 s, with a height of between 3 and 8 meters.
Unlike competitive systems, Safetech® does not put the parachute under constant pressure, which guarantees safe extraction and rapid deployment, as well as long-term storage of the parachute, without having to repackage it every week.
Resistance to any event

The reserve parachute strap is made of aramid / Kevlar, which guarantees a breaking strength of 300 kg. There are no knots in the lines such as the belt, which allows to obtain 100% mechanical resistance and an irreproachable finish, for an optimal useful life.

The parachute is made with the same industrial quality standards as an emergency parachute for ULM. The fabric has a silicone coating, with a particularly low mass (only 32gr / m2), to satisfy the need for lightness.
Low energy in the impact.

A new parachute geometry has been specially developed to meet the needs of lightness, small size, stability in flight, efficiency during opening. In this way, you can benefit from a very low drop rate, a maximum energy in the impact of 66J for a mass of 4.9 kg, for only a system mass of 250 g.
This low power will allow you to easily approve your machine with the DGAC for scenario S3.
Guarantee of reliability, serenity and safety.

An inventory of the market allows you to quickly understand the advantages of Safetech® technology:

    No pyrotechnic device: easy and safe air transport, without risk of uncontrolled explosion or during handling or maintenance.
    Without permanent parachute pressurization: longer conditioning time, the opening is ultra fast and efficient.
    Melting device without fuse for Lipo battery short circuit: no additional mass with lipo battery, shorter and optimized firing time, without the risk of inflating your Lipo battery, without risk of fire.

As you have understood, Safetech® technology will offer you the best safety and reliability standard to secure your unmanned aircraft in all situations, at a very attractive price.

    Dimensions of the tube: 150x60mm.
    Material: Carbon
    Mass of operation: 250gr (with adapter)
    Servo connector: UNI
    Signal: PPM / PWM compatible with dedicated radio remote control or stand-alone module
    Voltage: 4.8 to 7.2v
    Flat surface of the parachute: 1.8m2.
    Hangers: Dynema / Kevlar Aramid spliced ​​(no knots)
    Fabric: 32gr / m2 of silicone.
    Aramid strap 300daN (300kg)

Indicative drop rates according to the flight load for a 1.8m2 parachute:
Mass of the multi-rotor [kg]: 1.5 2 2.5 3 3.5 4 4.5 4.9
Falling rate [m / s]: 2.9 3.3 3.7 4.1 4.4 4.7 5 5.3
Energy impact [J]: 6 11 17 25 34 44 56 66
Included in this kit:

    1 Safetech ST60X ejection tube
    1 1.8m2 parachute
    1 fastening strap
    1 servomotor
    1 set of screws
    1 adapter Safetech ST60X for DJI inspires 2
    1 868MHz radio control (receiver, transmitter and USB cable)
    1 USB / JST cable

Information for the Inspire 2 S3 - DGAC approval:

DJI Inspire 2 with carrycot X4S:

    Total mass: 3992gr.
    it does not require a light device or the engine shutdown because the set is less than 4 kg: its DJI warranty is preserved and exempts it from any modification in the Inspire 2.

DJI Inspire 2 with carrycot X5S:

    the mass is greater than 4 kg: a device is required to switch off the motors / warning lights and sound. The CH0 channel of the 868mHz radio control can be used to control an external module to have these functions.

Product added to wishlist
Product added to compare.

This site uses cookies. You can read more about how we use them in the Privacy Policy Politica de privacidad